Mixing and Plugins

Vocal Compression for Home Recording: Settings That Work

Vocal compression settings for home recording: ratio, gain reduction, attack and release, plus a two-stage chain. Learn the order and common mistakes.

On this page
  1. What compression does for vocals
  2. Settings that work
  3. Two gentle stages in series
  4. 1176 and LA-2A in brief
  5. Before you compress
  6. After you compress
  7. Common mistakes

A vocal usually sounds best with two gentle stages of compression rather than one heavy one. Start with a ratio of about 2:1 to 4:1, aim for 3 to 6 dB of gain reduction on the peaks, and set make-up gain so the vocal sounds as loud as it did before you compressed it.

What compression does for vocals

Compression turns down the loud parts of a performance when they cross the threshold. Lyrics stay clear, because the big peaks don’t drown out the quieter words. You can then use make-up gain to bring the overall level back up.

Compression doesn’t make a vocal louder by itself. It evens out the level so the vocal sits more consistently in the mix.

Settings that work

These are starting points, and the right values depend on the voice, the mic and the genre:

Setting Starting point
Ratio 2:1 to 4:1 for most vocals; 4:1 to 8:1 for aggressive pop or rock
Gain reduction 3 to 6 dB on peaks
Attack 5 to 30 ms. Slower lets consonants through; faster (1 to 5 ms) catches peaks but can dull the sound
Release 40 to 150 ms, or auto. It should recover between phrases
Knee Soft knee sounds more natural on vocals
Threshold Set it to hit your gain-reduction target

Use the gain-reduction meter to set the threshold. Hearing compression on a vocal takes practice, so the meter is your guide at first.

Two gentle stages in series

Two compressors at 2 to 3 dB each usually sound smoother than one compressor at 6 dB. A common pairing is:

  1. A fast peak stage to catch the loud syllables, such as a 1176-style compressor.
  2. A slow leveling stage to smooth the performance, such as an LA-2A-style optical compressor.

If you only have one compressor, use it for the peak stage at 3 to 4 dB of gain reduction, then use a gentle stock compressor for leveling. The point is the same: two light stages sound better than one heavy one.

1176 and LA-2A in brief

  • 1176-style: fast and good for peaks. Its ratios are typically 4, 8, 12 and 20:1. Its attack and release knobs work backwards, so a setting of 7 is the fastest.
  • LA-2A-style: optical, with two main controls, Peak Reduction and Gain. Its release is program-dependent, so it adapts to the material.

Analog emulations of both are available free. See the best free compressor VST plugins for home mixing.

Before you compress

  • Clip gain or automation. Even out big jumps in level before the compressor. This keeps the compressor from doing all the work and gives a cleaner sound.
  • High-pass filter around 80 to 120 Hz. It stops low rumble from triggering the compressor. For more on high-pass settings, see what a high-pass filter is in audio.
  • Record with headroom. Aim for peaks around −10 to −6 dBFS. Compression can happen in the mix, and it doesn’t have to happen on the way in.

After you compress

  • De-ess after compression. Compression raises sibilance, so a de-esser placed after the compressor catches it. For how to set one, see what a de-esser is and how to use one.
  • Compress in the mix. A vocal can sound different in solo than in the full mix. Check the settings with the music playing.

Common mistakes

  • Louder isn’t better. After compression, the vocal is usually quieter, so make-up gain brings it back. Compare the bypassed and compressed versions at equal loudness.
  • Looking for a universal preset. Voice, mic and genre change the settings. Presets are a starting point only.
  • Assuming a fast attack is tighter. A very fast attack can remove clarity and punch from the performance.
  • Expecting compression to fix technique. It can’t fix poor mic position or a noisy room. It will often raise the noise. For mic placement and a quiet space, see how to record a voiceover at home.
  • Compressing on the way in. Hardware compression at the input is irreversible, so be conservative.

The complete guide to mixing and plugins

Home Mixing Basics and Simple Mixer Software
Read the guide

Keep exploring

Guides from other topics

All topics →