AI noise removal can clean up a recording that’s close to usable. It can’t rescue a recording that’s badly captured. Use it as a finishing step, not a fix for poor technique.
Short answer
Most AI denoisers work by separating speech from background noise such as hiss, hum, traffic and room tone. For how these differ, see the different types of noise. The best results come from a clean recording, applied lightly. If you’re choosing a tool, pick one that matches where you work: desktop, browser, real-time or inside your editor.
Tools compared
| Tool | Type | Notes |
|---|---|---|
| iZotope RX (Elements, Standard, Advanced) | Desktop | Voice De-noise, Dialogue Isolate and Spectral De-noise; a standard for post-production |
| Adobe Podcast Enhance Speech | Browser | Free tier with usage limits; premium tiers have different limits |
| NVIDIA Broadcast | Desktop, real-time | Free; needs an NVIDIA RTX GPU |
| Krisp | Real-time, for calls | Free tier with minute limits |
| Descript Studio Sound | Built into Descript | Part of the Descript editor, on a subscription |
| DaVinci Resolve Voice Isolation | Built into Resolve | In the paid Studio version |
| Waves Clarity Vx, Supertone Clear | Plugins | AI vocal denoisers that run inside your DAW |
| Audacity Noise Reduction | Free, not AI | Spectral; needs 1 to 2 seconds of noise-only room tone |
| RNNoise (Xiph) | Free, open source | Neural denoiser; the basis of OBS’s RNNoise filter |
Prices and tiers change often, so check each vendor’s current pricing before you buy.
Desktop and professional tools
iZotope RX is the usual choice for dialogue cleanup in post-production. Its Voice De-noise, Dialogue Isolate and Spectral De-noise modules cover most spoken-word problems. The Elements tier is the entry point. Waves Clarity Vx and Supertone Clear are plugins that suit a DAW workflow. DaVinci Resolve’s Voice Isolation is useful if you already edit in Resolve, but it’s in the paid Studio version.
Browser tools
Adobe Podcast Enhance Speech runs in a browser and has a free tier with usage limits. It’s quick for a single voice track, but your audio goes to a server, so see the privacy section below.
Real-time tools for calls and streams
NVIDIA Broadcast is free and works in real time, but it needs an NVIDIA RTX graphics card. Krisp is built for calls and has a free tier with minute limits. RNNoise is open source and is the engine behind OBS’s RNNoise filter, which many streamers use.
Built into your editor
Descript Studio Sound is part of the Descript editor and is included with a subscription. It’s a good choice if you already edit speech in Descript.
Free options that aren’t AI
Audacity’s Noise Reduction effect is spectral, not AI. To use it, select 1 to 2 seconds of noise-only room tone, take a noise profile from that, then apply the effect to the whole track. On Windows, Audacity’s OpenVINO plugins from Intel can add AI noise suppression, but availability depends on your platform. For where noise reduction fits in a full cleanup, see how to make audio higher quality in Audacity.
Apply it lightly
Over-processed speech is the most common problem. Listen for:
- an “underwater” sound
- warbling
- a metallic tone
- a lisping or thin voice
The fix is to apply the tool gently, usually at about 50 to 80 percent strength where the tool allows it. Blend the processed signal with the dry one if the tool supports it. Then A/B the result against the original at the same level, because processing often changes loudness and makes the cleaned version sound better for the wrong reasons.
Privacy and uploads
Browser and web tools upload your audio to a server. Local tools keep the audio on your device. Before you upload a confidential interview or unreleased material, check the service’s privacy terms.
What AI can’t fix
- Speech buried in noise can’t be fully recovered. AI denoise works best when the voice is still clearly audible.
- Clipping is hard to undo. Heavy distortion often can’t be separated from the voice.
- “Enhance” tools do more than remove noise. Many also change the voice’s tone and add EQ or compression, which you may not want.
- A noise gate isn’t noise removal. A gate only mutes gaps between phrases, so it doesn’t clean up noise under the speech. For the difference, see what a noise gate is and when to use one.
Record cleaner next time
The easiest way to reduce noise is to avoid it at the source:
- Use a close mic position, and keep the room quiet.
- Set levels so peaks sit around −12 dBFS. This leaves headroom and avoids clipping.
- Treat or move away from obvious noise sources, such as fans and traffic.
For a budget setup that keeps noise down from the start, see how to record a voiceover at home.
For the mixing side, see home mixing basics.