Mixing and Plugins

EQ Basics: High-Cut Filters and the Best Free Parametric EQ

High-cut (low-pass) filters explained, with cutoff, slope and starting points for common sources. Learn to use a free parametric EQ and when to stop cutting.

On this page
  1. High-cut basics
  2. Common starting points
  3. Parametric EQ controls
  4. Free parametric EQs to try
  5. Phase: minimum or linear
  6. Make room at the top end
  7. Resonant filters
  8. Common mistakes

A high-cut filter is a low-pass filter. It passes the lows and reduces everything above its cutoff. Use it to remove unwanted top end, such as hiss or harshness. A parametric EQ gives you the control to place that cut precisely, and several free parametric EQs can do the job.

High-cut basics

  • Cutoff: defined at the −3 dB point, the frequency where the signal is already 3 dB down.
  • Slope: the rate of the cut, in dB per octave. Common slopes are 6, 12, 18, 24 and 48 dB/oct. Each filter pole adds about 6 dB/oct.
  • Hearing range: most people hear roughly 20 Hz to 20 kHz. The upper limit for adults is often 15 to 17 kHz, so a cut above that won’t change what most listeners hear.

Common starting points

These are starting points that vary by source and recording:

Source Starting high-cut
Bass guitar 5 to 8 kHz
Kick drum 8 to 12 kHz
Distorted guitars 8 to 12 kHz
Vocals (to tame hiss) 16 to 18 kHz

Set the cutoff, then listen for the point where the hiss or harshness drops out without the source going dull. If the hiss comes from your interface or gain setting, fix it at the source first; see how to fix static, buzz and digital noise from an audio interface.

Parametric EQ controls

A parametric EQ gives you three controls per band:

  • Frequency: where the band sits.
  • Gain: how much to boost or cut.
  • Q: the bandwidth. A higher Q is a narrower band.

Use the rule of thumb cut narrow, boost wide. A narrow cut removes a specific problem, such as a harsh resonance. A wide boost shapes the overall tone.

Free parametric EQs to try

  • TDR Nova: a parallel dynamic EQ with four bands, plus high-pass and low-pass filters.
  • TDR VOS SlickEQ: an analog-style three-band EQ with filters.
  • MeldaProduction MEqualizer: a six-band parametric EQ in the free MFreeFXBundle.
  • ReaEQ: part of the ReaPlugs package for REAPER. It has unlimited bands and is light on CPU.
  • Kilohearts 3-Band EQ: part of the free Kilohearts Essentials bundle.
  • Stock EQs: most DAWs include a capable parametric EQ, such as Logic’s Channel EQ.

For a fuller comparison of free EQs, including which suits surgical work and which suits tone, see the best free equalizer VST plugin.

Phase: minimum or linear

Most EQs are minimum-phase, which shifts phase near the cutoff. Linear-phase EQ avoids that phase shift, but it adds latency and pre-ringing. Neither is automatically better. Choose by the job, and check the result in context. Bypass linear-phase EQs while tracking, because plugin delay adds to what the performer hears.

Make room at the top end

High-cutting non-lead tracks can make room for vocals and cymbals, which often need clear top end. Start with the parts that don’t need it, such as bass or reverb returns, and check the change in the full mix.

Cutting the top of every track can make a mix dull, though. Make the cuts where they’re needed, not as a default on every channel.

Resonant filters

A high-Q filter adds a bump just below the cutoff. This is useful for synth tone, but it’s usually not what you want for cleanup. For cleanup, use a moderate Q and a clean cut.

Common mistakes

  • Confusing high-cut with high-pass. A high-pass removes the lows and keeps the highs. A high-cut removes the highs. For the other filter, see what a high-pass filter is in audio.
  • Using a steep slope by default. Very steep slopes, such as 48 dB/oct, can sound unnatural and ring. Start gentler.
  • Assuming linear phase is better. It’s a trade-off, not an upgrade.
  • Judging a cut in solo. A cut that sounds right alone can make the full mix dull. Listen in context.
  • Thinking free EQs are worse. Clean digital EQ is mature, and many free options are capable. Download only from the developer’s own site.

The complete guide to mixing and plugins

Home Mixing Basics and Simple Mixer Software
Read the guide

Keep exploring

Guides from other topics

All topics →