Recording on a Computer

How to Record High-Quality Audio on Your Computer

Record computer audio on Windows or a Mac and capture your voice at good quality. Practical setup steps, key settings and common mistakes to avoid.

On this page
  1. Quick answer
  2. Computer sound and your voice are two different inputs
  3. Record computer sound on Windows
  4. Record computer sound on a Mac
  5. Record your voice at good quality
  6. Recording both at once
  7. Settings that matter
  8. Room and mic habits
  9. Common mistakes
  10. FAQ
  11. Permission and consent

Quick answer

Yes. You can record the sound your computer plays and your own voice at good quality with free software. On Windows, Audacity can record computer audio directly using WASAPI loopback. On a Mac, standard recording tools capture only the microphone, so you need a virtual audio driver such as BlackHole. Some newer macOS versions may also offer a built-in system audio option. For your voice, a dedicated microphone will usually sound much better than a laptop’s built-in mic.

Computer sound and your voice are two different inputs

Computer audio (also called system, desktop or internal audio) is the signal your computer sends to its speakers or headphones: a video, a game, music, or the other side of a call. Your voice comes in through a microphone. Most recording software can capture only one of these at a time unless you set up some routing.

That difference explains most of the confusion. If you select the microphone and turn up your speakers, you record the room, not the digital signal. Capturing the signal directly gives a cleaner result.

Record computer sound on Windows

There are two common methods.

WASAPI loopback (Audacity). Open Audacity, set the audio host to Windows WASAPI, and choose your speakers or headphones marked (loopback) as the recording device. Play your audio, click Record, then Stop, and export. WASAPI loopback works without extra drivers and records the digital signal rather than a microphone.

Stereo Mix. Some sound drivers, often Realtek, offer a Stereo Mix recording device. To check, open the Sound Control Panel, go to the Recording tab, right-click an empty area and tick Show Disabled Devices. If Stereo Mix appears, right-click it and choose Enable. If it doesn’t appear, your driver doesn’t support it. That’s a driver limitation, not a fault in Audacity.

For step-by-step Audacity detail, see how to record desktop audio in Audacity.

Record computer sound on a Mac

Recording tools on macOS generally can’t capture computer audio without help, so you use a virtual audio driver. BlackHole is a free, open-source choice. In short:

  1. Install BlackHole.
  2. In Audio MIDI Setup, create a Multi-Output Device with your speakers or headphones and BlackHole, so you can still hear the sound.
  3. In System Settings > Sound, set the output to that Multi-Output Device.
  4. In your recording app (QuickTime, Audacity, GarageBand or OBS), choose BlackHole as the input.

Before you install anything, check the Screenshot toolbar (Shift-Command-5) for a system audio option. Newer macOS versions may include one. For the full setup, see how to record internal audio on a Mac.

Soundflower is an older virtual driver that doesn’t support Apple Silicon Macs. BlackHole is the one to use.

Record your voice at good quality

For speech, a dedicated microphone is a clear step up from a laptop’s built-in mic. Two common routes:

  • USB microphone. It plugs straight into the computer and shows up as an input. Many USB mics perform about as well as entry-level XLR setups, so they aren’t inherently lower quality.
  • Audio interface and XLR microphone. An interface, such as the Focusrite Scarlett Solo, Behringer UMC22 or Audient EVO 4 (roughly $50 to $150; prices vary), gives you a proper preamp. See how to set up an audio interface. Condenser microphones need 48 V phantom power. Dynamic microphones don’t.

Windows includes a basic Sound Recorder app that records from the microphone. It’s fine for quick voice notes, but it doesn’t capture computer audio. On a Mac, QuickTime Player’s audio recording also records the microphone only.

There isn’t one best brand. Mic distance, the room and your gain setting matter more than the name on the box.

Recording both at once

Audacity can’t record two inputs at once on its own. To capture your mic and computer audio together, you need a routing tool:

  • Windows: a virtual mixer such as Voicemeeter can combine the microphone and desktop audio into one input.
  • Mac: an Aggregate Device can combine your microphone and BlackHole. Keep the sample rates matched in Audio MIDI Setup.

If you want to edit the sources separately later, record them as separate tracks instead. OBS can do that, as described in how to record separate audio tracks in OBS.

Settings that matter

  • Format. Record uncompressed WAV at 24-bit and 48 kHz for video and podcasts, or 44.1 kHz for music. At 24-bit, the theoretical dynamic range is roughly 144 dB, compared with about 96 dB at 16-bit.
  • File size. A 24-bit, 48 kHz mono WAV is about 8.6 MB per minute. Stereo is about 17.3 MB per minute.
  • Levels. Aim for peaks around -12 to -6 dBFS and average speech around -18 dBFS. Never reach 0 dBFS, because clipping can’t be undone. A quiet, clean take is easier to fix than a clipped one.
  • Buffer size. While recording, use a small buffer (64 to 128 samples) to keep latency low. Use a larger buffer (512 to 1024) when you mix, to ease the load on your computer. At 48 kHz, 128 samples is about 2.7 ms of one-way buffer delay. Total round-trip latency is higher and depends on the driver.
  • Sample rate. A 96 kHz recording doesn’t noticeably improve voice. It mainly makes bigger files.

Room and mic habits

  • Keep the microphone about 6 to 12 inches (15 to 30 cm) from your mouth. Put a pop filter a couple of inches from the capsule.
  • Soft furnishings such as rugs, curtains and closets absorb reflections. Small, bare, square rooms usually sound worst.
  • Use closed-back headphones while recording a microphone, to avoid bleed and feedback.
  • Record 10 to 30 seconds of room tone (silence in the same room, with the same gain setting). You can use it later for noise reduction.
  • On Windows, disable “audio enhancements” for the microphone in the sound settings.

Noise reduction can’t fix a reverberant room well. If the recording sounds echoey, move the mic closer or treat the room before you reach for a plugin.

Common mistakes

  • Recording as hot as possible. At 24-bit, headroom matters more than loudness.
  • Expecting noise reduction to remove echo. It mostly can’t.
  • Saving masters as MP3. Keep WAV or FLAC for editing and export a lossy copy only for delivery.
  • Assuming paid software records better audio. The microphone, interface and room decide most of the quality.
  • Switching on phantom power with loud speakers. Turn monitors down first to avoid speaker pops.

FAQ

Can you record just the audio from your computer?

Yes. On Windows, use Audacity with WASAPI loopback, or Stereo Mix if your driver offers it. On a Mac, install BlackHole (or use a system audio option if your macOS version has one), then route your output through a Multi-Output Device.

Does Windows 11 have a built-in audio recorder?

Yes. Its Sound Recorder app records from the microphone. It doesn’t capture computer audio, so use Audacity or another tool for that.

How do you capture computer audio in OBS?

Add an audio capture source for your system audio. On Windows, that’s a desktop audio or application audio capture source. On macOS 13 or later, it’s the macOS audio capture source. Then assign it to the tracks you need. See how to record separate audio tracks in OBS.

How do you record your voice in high quality?

Use a dedicated microphone, record in a dry room, keep the mic 6 to 12 inches from your mouth, aim for peaks around -12 to -6 dBFS, and record WAV at 24-bit and 48 kHz. For a budget setup, see how to record a voiceover at home on a budget.

Recording audio that’s playing on your computer may breach copyright or a service’s terms. Get permission before you reuse someone else’s audio. When you record a call or meeting, tell everyone taking part. Some places, including California and Illinois in the US, require all parties to agree to be recorded.

Keep exploring

Guides from other topics

All topics →