Mixing and Plugins

Stereo Width, Mono and Binaural: Free Plugins and Techniques

Free stereo wideners, mono checks and binaural panners. Learn width basics, how to convert stereo to mono in Audacity and DAWs, and which free plugins to try.

On this page
  1. Stereo width basics
  2. Free stereo wideners and imagers
  3. Keep the low end mono
  4. Converting stereo to mono
  5. Why check mono
  6. Mono mode on phones and computers
  7. Binaural audio and free binaural panners
  8. Common misconceptions

Stereo width, mono and binaural are related ideas, but they’re different things. Stereo width is how spread out a mix sounds between left and right. Mono is a single channel that every speaker can play. Binaural is a headphone technique that places sounds around the listener using head-related transfer functions (HRTFs).

Stereo width basics

Mid/side describes a stereo signal as a sum and a difference: Mid = (L+R)/2 and Side = (L−R)/2. Widening raises the Side level relative to the Mid.

A correlation meter shows how similar the left and right channels are. +1 means mono, 0 means uncorrelated, and −1 means out of phase, which cancels in mono.

There are two ways to get width without much processing:

  • Double-track a part and pan the takes hard left and right. This gives natural width.
  • Use the Haas (precedence) effect. Delaying one side by roughly 1 to 35 ms widens the image without a distinct echo. The catch is that it can collapse with comb filtering when the mix is summed to mono.

Free stereo wideners and imagers

Is Polyverse Wider free? Yes. Polyverse Wider is a free widener that’s built to stay mono-compatible. Check the current version’s controls before you rely on them, since reviewers have highlighted features such as a low-frequency bypass.

What is the best free stereo imaging plugin? There isn’t one best choice, but these are good places to start:

  • Polyverse Wider: a simple width control. Keep the width moderate, because very wide settings can lose focus.
  • Ozone Imager (free): a stereo imager from iZotope’s Ozone engine. Many versions show a vectorscope, which helps you check width and mono compatibility.
  • Voxengo MSED: a free mid/side encoder and decoder. You can adjust the mid and side levels separately and check the result on the correlation view.
  • Kilohearts Stereo and Haas: both are in the free Kilohearts Essentials bundle.

A stereo enhancer can’t create real stereo from a mono file. It adds phase or delay tricks, so the effect is an illusion. If the source is mono, the widening will be an approximation. For real stereo, record a stereo mic pair.

Keep the low end mono

Keep the kick, bass and lead vocal centred. As a rule, keep the low end below about 100 to 150 Hz mono. Widening the bass makes it weaker on phone speakers and club systems, which are often mono.

Converting stereo to mono

How to convert stereo audio to mono? The method depends on your tool:

  • Audacity: go to Tracks > Mix > Mix Stereo Down to Mono.
  • Most DAWs: change the track’s channel format to mono, or bounce a mono file.
  • Online downmixers: these exist, but they upload your file to a server. Check the privacy terms before you use one on unreleased or confidential audio.

When you sum left and right to mono, the level can change. DAWs often apply about −3 or −6 dB to avoid clipping, and the exact amount varies. Side-heavy parts lose the most level, so an element that sounded full in stereo may thin out.

Why check mono

Why do audiophiles like mono? Some listeners and engineers prefer mono because it gives a focused, centred image. Preference varies, and it isn’t a rule. For a mixing engineer, the more practical reason is that mono is a reliable check.

Many playback systems are mono or close to it, including phone speakers, club PAs and smart speakers. A mix that collapses in mono will often sound thin or lopsided on these systems. For spoken recordings, a mono file is often enough, and it holds half the audio data of an equivalent stereo file at the same sample rate and bit depth.

Mono mode on phones and computers

How to activate mono mode? It depends on the device:

  • iPhone and iPad: go to Settings > Accessibility > Audio & Visual and turn on Mono Audio. The full steps are in how to turn on mono audio on iPhone.
  • Windows: there’s a mono audio option in its sound or accessibility settings. The exact location depends on your version of Windows, so check the current menus.

Binaural audio and free binaural panners

Binaural audio uses HRTFs to place sounds around the listener. It works only on headphones. Over speakers, the two ears hear crosstalk, which ruins the effect, so a binaural mix won’t translate to a speaker system.

Binaural audio and binaural beats are different. Binaural beats are a perceived beat created by two slightly different tones, one in each ear. They’re a tone illusion, not a panning technique.

Free binaural and 3D panners to try include dearVR Micro, Anaglyph and Sennheiser AMBEO Orbit. Their availability can change, so check the developer’s site before you install.

Common misconceptions

  • Wider isn’t always better. Excessive width loses the centre focus and the mono energy.
  • A stereo enhancer can’t make a mono file truly stereo.
  • A binaural mix won’t sound right on speakers. Test it on headphones.

For more on checking a mix in mono and on monitoring, see home mixing basics. For installing a free plugin in the right format, see plugin formats: Audio Units vs VST3.

The complete guide to mixing and plugins

Home Mixing Basics and Simple Mixer Software
Read the guide

Keep exploring

Guides from other topics

All topics →