Mixing and Plugins

Free Oscilloscope, Resonator and Bitcrusher Plugins

Free oscilloscope, resonator and bitcrusher plugins for home studios. See what each tool does, which free picks to try and how to bitcrush in Audacity.

On this page
  1. Free oscilloscope plugins
  2. Free resonator plugins
  3. Free bitcrushers
  4. Bitcrushing in Audacity
  5. Safety
  6. Where these tools fit

Some of the most useful plugins for a home studio aren’t EQs or compressors. An oscilloscope shows what a signal is doing, a resonator adds tuned ringing, and a bitcrusher makes a sound deliberately lo-fi. Each has free options.

Free oscilloscope plugins

An oscilloscope shows amplitude over time. It’s useful for checking waveform shape, peaks and clipping, and transients. You can also use it to see whether two layers line up.

Two related tools are different:

  • A vectorscope (or goniometer) shows stereo phase as a pattern. It’s useful for checking width and mono compatibility.
  • A spectrum analyser shows frequency, not the waveform. Voxengo SPAN is a free example.

Free picks to try:

  • s(M)exoscope: a classic free oscilloscope. Community-updated builds are available.
  • MOscilloscope: from MeldaProduction, included in the free MFreeFXBundle.

An oscilloscope isn’t a meter. It can’t measure loudness or frequency balance accurately. For level, use a loudness meter; for loudness targets, see how to master audio tracks at home.

Free resonator plugins

A resonator is built from tuned comb filters or short delay lines that ring at set pitches. It’s useful for tuned, metallic or ringing textures. It isn’t a reverb, although both ring.

A comb filter’s delay time is 1 divided by the frequency. For A4 at 440 Hz, that’s about 2.27 ms. This is why a resonator can make a sound ring at a chosen pitch.

The free option to look for is the Kilohearts Resonator, which is part of the free Kilohearts Essentials bundle. The same bundle includes a Comb Filter, Bitcrush, Ring Mod and Formant Filter.

Free bitcrushers

Bitcrushing does two things:

  • Bit-depth reduction adds quantisation noise, which sounds gritty.
  • Sample-rate reduction causes aliasing, because a bitcrusher deliberately skips the anti-alias filtering that a normal converter would use. For how sample rate sets the frequency ceiling, see sample rate vs bitrate.

Each bit adds roughly 6 dB of dynamic range. So 16-bit is about 96 dB, 8-bit about 48 dB and 4-bit about 24 dB. Fewer bits means more audible grit.

Free options to try:

  • Kilohearts Bitcrush: part of Kilohearts Essentials. It has a rate control that downsamples to as low as 200 Hz, a bits control, a dither control, separate ADC and DAC quality controls, and a dry/wet Mix knob.
  • TAL-Bitcrusher: another free option.
  • Stock options: many DAWs include one, such as Logic’s Bitcrusher or Ableton’s Redux. FL Studio users can reach for Fruity Squeeze or Distructor, as in this radio voice chain.

Check the plugin’s format and operating system support before you install, because some older freeware is Windows-only or 32-bit. For that check, see plugin formats: Audio Units vs VST3.

To crush subtly, use the Mix knob, or send the sound to a parallel bus and blend it in under the dry track. The same blend idea is covered in parallel compression explained.

Bitcrushing in Audacity

Audacity has no dedicated bitcrusher. You have three options, each with trade-offs:

  1. Use the Distortion effect. Go to Effect > Distortion and Modulation > Distortion and choose Hard Clipping. It gives a harsh, crunchy edge, but it’s clipping, not true bit reduction.
  2. Load a VST3 bitcrusher. Audacity 3.2 and later support VST3 plugins, so a free bitcrusher can run as a real-time effect.
  3. Resample and re-export. Resample to a low rate such as 8 kHz, export at 8-bit, then re-import. This is an offline process, so keep a copy of the original.

Safety

Bitcrushers and resonators can produce sudden loud spikes. Turn your monitor level down before you audition a new preset or a resonator setting.

Where these tools fit

Creative effects work best as a blend, not at full wet. For the mixing context, see home mixing basics. For a free EQ to pair with these tools, see the best free equalizer VST plugin.

The complete guide to mixing and plugins

Home Mixing Basics and Simple Mixer Software
Read the guide

Keep exploring

Guides from other topics

All topics →