Start here · Essential guide
Sample Rate vs Bitrate: What Actually Affects Audio Quality
Sample rate, bit depth and bitrate measure different things. Learn what each one controls and which setting actually affects your recordings and files.
Recording
Sample rate, bit depth, bitrate, file formats, headroom and dithering explained in plain terms.
Start here · Essential guide
Sample rate, bit depth and bitrate measure different things. Learn what each one controls and which setting actually affects your recordings and files.
WAV, AIFF, FLAC and ALAC keep every bit of the original audio, while MP3 and AAC discard data. Pick the right format for recording, archiving and sharing.
Bit depth sets dynamic range and noise floor, not frequency detail. Compare 16-bit, 24-bit and 32-bit float, and learn which to record and deliver at.
Neither rate is better for music you can hear. Choose 44.1 kHz for CD-bound music and 48 kHz if your audio will sit alongside video or film.
For most home studios, 96 kHz recording roughly doubles storage and CPU load for little audible gain. Here is when it makes sense and when 48 kHz is enough.
Yes, 64-bit float exists: it is double-precision processing used inside DAWs. No recorder captures it, and most delivery formats do not accept it.
Recording uses uncompressed WAV, not a kbps setting. Here are practical bitrate ranges for MP3, AAC and lossless files when sharing or streaming.
A 64-bit processor has 64-bit registers and memory addressing. Here is what that means for your computer, your DAW and the plugins you run in a home studio.
Dither is low-level noise added when you cut bit depth, such as exporting 24-bit to 16-bit. Learn when to use it, when to skip it and where it goes.
Aim for peaks around -12 to -6 dBFS when recording at 24-bit, with average levels near -18 dBFS. Headroom guards against clipping, which cannot be undone.
Related topics