Audio Interfaces

How to Record Two Microphones at Once with One Audio Interface

Record two mics at once through one audio interface: wire the inputs, set separate gain and tracks, and avoid phase problems with simple placement rules.

On this page
  1. Yes, if your interface has two mic preamps
  2. Wire it up
  3. Set up two tracks in your DAW
  4. Phantom power
  5. Placement and phase
  6. Stereo pairs
  7. What doesn’t work
  8. Two USB microphones

Yes, if your interface has two mic preamps

You can record two microphones at once through one audio interface, as long as it has two mic preamps. Examples include the Scarlett 2i2, the Volt 2 and the Behringer UMC202HD. Each mic goes into its own input, and each input records to its own track.

A Scarlett Solo has one mic input and one instrument input, so it can’t record two mics at once.

Wire it up

  • Plug mic 1 into input 1, and mic 2 into input 2.
  • Set each input’s gain separately. Aim for peaks around -12 to -6 dBFS on each channel.
  • Many two-input interfaces use a single phantom power switch for both inputs. If you use phantom power, it applies to both mics, so turn it on only if both need it.

Set up two tracks in your DAW

  1. Create two mono tracks.
  2. Set track 1 to input 1, and track 2 to input 2.
  3. Arm both tracks and record.

Separate tracks let you EQ, level and edit each mic on its own later.

In Audacity, set the recording channels to 2 (stereo) before you record. After recording, use Split Stereo to Mono. The default mono setting records only input 1. For splitting and exporting the tracks, see audio editing basics in Audacity.

Phantom power

Phantom power is fine for most dynamic mics. Check older or vintage ribbon mics before you apply it, because some can be damaged.

Placement and phase

Two mics picking up the same source can cancel each other out, which thins the sound. Two simple checks help:

  • The 3:1 rule of thumb: keep the distance between the two mics at least three times each mic’s distance from the source. It’s a rule of thumb, not a law.
  • A phase check: sum the two tracks to mono and listen. Then flip the polarity on one track and compare.

If you’re recording two speakers or amps, dynamic mics such as the SM58 or SM7B reject bleed from each other better than condensers do.

Stereo pairs

If you want the two mics to work as a stereo pair, use a stereo technique:

  • XY: the capsules sit together, typically angled 90 to 135 degrees.
  • ORTF: the capsules are about 17 cm apart, angled at 110 degrees.
  • Spaced pair (A-B): two mics placed apart, both facing the source.

Keep the two mics on separate tracks, even when you record them as a pair, so you can edit each one later. Recording both to one stereo track limits your options afterward.

What doesn’t work

  • A Y-splitter can’t merge two mics into one input. It won’t give you two usable signals.
  • A “stereo” input on a two-input interface isn’t one channel. It’s two mono inputs.
  • Two mics aren’t automatically better. Phase problems can thin the sound, so check your placement.

Two USB microphones

Two USB mics are harder to combine. On a Mac, you can create an Aggregate Device in Audio MIDI Setup so the two mics appear as one input. On Windows, you’ll usually need third-party tools.

For a two-input interface example, see Focusrite Scarlett 2i2 setup for beginners. For a broader look at setting up an interface, see how to set up an audio interface for home recording.

The complete guide to audio interfaces

How to Set Up an Audio Interface for Home Recording
Read the guide

Keep exploring

Guides from other topics

All topics →