FL Studio

FL Studio Vocal Effects: Radio Voice and Talkbox

Build a radio voice and talkbox sound in FL Studio with stock plugins: band-pass EQ, distortion, hard compression and a vocoder with a synth carrier.

On this page
  1. What makes a voice sound like a radio
  2. Build the radio voice with stock plugins
  3. Put the chain on the vocal’s track
  4. Talkbox sounds: how a vocoder works
  5. Set up a vocoder in FL Studio
  6. Carrier sounds that work
  7. Pitch correction for a robotic sound
  8. Hardware talkbox vs vocoder
  9. Common misconceptions
  10. Related guides

A radio voice and a talkbox are two different effects that people often search for together. A radio voice is an EQ and distortion chain. A talkbox sound in software is a vocoder, where your voice shapes a synth. This guide covers both, using FL Studio’s stock plugins where possible.

What makes a voice sound like a radio

A radio or telephone voice removes both the low end and the high end, so only the middle of the voice remains. This is a band-pass sound. A classic telephone band runs from roughly 300 Hz to 3.4 kHz. Filtering only the highs, or only the lows, will not give the same character.

Build the radio voice with stock plugins

EQ: band-pass with a high-pass and a low-pass

In Fruity Parametric EQ 2, add a steep high-pass somewhere around 300 to 500 Hz and a steep low-pass around 3 to 4 kHz. For a more speaker-like sound, add a gentle boost of about 1 to 2 kHz. Adjust these by ear, because the right values depend on the voice.

Grit: distortion or bitcrushing

Add grit after the EQ. Fruity Blood Overdrive, Fruity Fast Dist, Distructor and Fruity WaveShaper can all work. Start with light settings. Putting the EQ before the distortion gives a tighter band, but the other order also works, so test both.

Compression: hard and flat

A broadcast sound is usually compressed hard and kept flat. A ratio of 4:1 or higher is a reasonable starting point, but the settings are a matter of taste. For gentler settings on a normal vocal, see vocal compression for home recording.

Old-radio noise

For an older radio feel, add light noise or vinyl crackle, and a little bitcrushing with Fruity Squeeze or Distructor. Keep these subtle, or the vocal will become hard to understand.

Put the chain on the vocal’s track

Place the chain on the vocal’s mixer track, so the effect follows the vocal through your mix. You can then automate the EQ’s cutoffs, or the bypass, to switch between the radio sound and the full voice.

Talkbox sounds: how a vocoder works

A talkbox sound in software is a vocoder. Your voice (the modulator) shapes the frequency content of a synth (the carrier), so the synth seems to speak the words. A vocoder needs both signals. A vocal on its own does nothing useful in a vocoder.

Set up a vocoder in FL Studio

  • Fruity Vocoder is FL Studio’s native vocoder.
  • Vocodex is Image-Line’s more advanced vocoder. Whether you have it depends on your edition.
  • Send the synth and the voice to the vocoder’s two inputs. Routing depends on the plugin and version, so check the plugin’s help for which input carries the voice and how to send audio between mixer tracks.
  • Third-party options include TAL-Vocoder and MAutoVocoder.

Carrier sounds that work

  • Bright sawtooth or square synths give clear words, because they contain the harmonics the vocoder needs to shape.
  • Sustained chords hold the vowels well. Simple, steady parts are easier to follow than fast runs.

Pitch correction for a robotic sound

If you want a robotic, Auto-Tune-style sound next to the talkbox, pitch-correct the vocal first with a pitch-correction plugin. A talkbox and Auto-Tune are different effects. The talkbox shapes an instrument with the mouth, and Auto-Tune corrects pitch.

Hardware talkbox vs vocoder

A hardware talkbox sends a synth through a tube into the mouth, and a microphone picks up the shaped sound. It is a different device from a software vocoder, and it sounds different too.

Keep the speaker volume low when you use a hardware talkbox. High levels going into the mouth can harm your hearing.

Common misconceptions

  • “A talkbox and Auto-Tune are the same.” They are different effects.
  • “A vocoder works on the vocal alone.” It needs a carrier, such as a synth.
  • “Radio voice is just a low-pass filter.” You need to cut both the lows and the highs.
  • “Distortion must always come before the EQ.” Either order can work, so test both.

For the wider mix, see mixing and mastering in FL Studio. If you still need to record the vocal, how to record audio in FL Studio covers the setup.

The complete guide to fl studio

Best FL Studio Audio Settings, ASIO Driver and System Requirements
Read the guide

Keep exploring

Guides from other topics

All topics →