FL Studio

Mixing and Mastering in FL Studio (Plus FLAC Export Settings)

Mix and master in FL Studio with stock plugins, gain staging, a simple master chain and streaming loudness targets, plus FLAC export settings explained.

On this page
  1. Set up one mixer track per sound
  2. Gain staging before mastering
  3. Stock tools for mixing
  4. A simple master chain
  5. Loudness: what streaming platforms do
  6. Export settings
  7. Common misconceptions
  8. Related guides

Mixing is the work of balancing the sounds in a project so they sit well together. Mastering is the last step, which prepares the finished stereo mix for release. Export settings decide the file you deliver. This guide covers a practical FL Studio workflow using the stock tools.

Set up one mixer track per sound

Route each instrument or sample to its own mixer track. Select the channel in the Channel Rack, select an empty mixer track, then press Ctrl+L to link them. On a Mac, use Cmd+L. To route several selected channels to consecutive tracks, use Shift+Ctrl+L. A separate track for each sound lets you balance and process it on its own. For a closer look at routing, see what Ctrl+L does on FL Studio.

Name and colour the tracks as you go. It is much easier to mix a project when you can find each sound quickly.

Gain staging before mastering

Gain staging means keeping levels comfortable at each stage, so nothing clips and the mix has room to breathe. A common starting point is:

  • Individual tracks averaging around -18 dBFS.
  • Master peaks around -6 dBFS before mastering.

FL Studio’s mixer processes audio internally in 32-bit float, so a track meter that goes into the red does not distort by itself. The master output and the export do clip above 0 dBFS. If the master is too hot, lower the source tracks or the channel volumes rather than relying on the master limiter. The audio clipping guide explains this in more detail.

Stock tools for mixing

  • Fruity Parametric EQ 2: a seven-band equaliser for shaping each track.
  • Fruity Compressor: for controlling dynamics on individual tracks or groups.
  • Fruity Limiter: a limiter that also compresses. It is used on the master in the default template.
  • Fruity Reeverb 2 and Fruity Delay 3: reverb and delay for space and depth.
  • Maximus (multiband) and Soundgoodizer: mastering helpers. Whether you have them depends on your edition.

Cut problem frequencies before you boost. A high-pass filter on tracks that do not need bass can clear up low-end mud.

A simple master chain

A common order for a master chain is EQ, then glue compression, then a limiter. The home mastering guide covers each stage in more depth.

  • EQ: gentle, corrective moves. Do not try to fix a weak mix here.
  • Glue compression: a modest setting, such as about 2:1, that takes off around 1 to 3 dB of gain reduction.
  • Limiter: sets the ceiling. For streaming, a ceiling of about -1 dBTP leaves room for encoding overs.

The default template puts Fruity Limiter on the master. While you mix, adjust it or remove it so it does not hide overs. A master chain will not fix a bad mix. Balance and EQ problems are easier to solve in the mix itself.

Loudness: what streaming platforms do

Streaming platforms normalize loudness. They turn down tracks that are much louder than their target, so pushing a master very loud does not make it sound better there. Approximate targets, which can change over time, are:

  • Spotify and YouTube: about -14 LUFS integrated.
  • Apple Music: about -16 LUFS.

You may see advice to master at -8 to -6 LUFS for streaming. That does not match how normalization works, so treat it with caution. Aim for a clean master that sounds good at the platform targets.

AI mastering is part of the optional FL Cloud subscription. Its features vary, so check what your plan includes.

Export settings

Go to File > Export (Ctrl+R) and choose WAV, MP3, OGG or FLAC.

Choose a format

  • WAV is uncompressed and common for masters and distribution.
  • FLAC is lossless and smaller than WAV, with the same audio.
  • MP3 and OGG are lossy, so they make smaller files by removing some detail.

For how these formats compare, see best audio formats for quality.

FLAC compression level

FLAC levels run from 0 to 8, and the dialog’s default is often 5. Every level is lossless. A higher level only makes the file slightly smaller and takes longer to encode. It does not improve sound quality. If you think one level sounds better than another, check the rest of your export settings first.

Bit depth and dither

  • 16-bit is standard for CD-style delivery.
  • 24-bit is useful for archiving masters and for files you may edit later.

When you reduce a project to 16-bit, turn on dither. It helps avoid distortion on quiet detail.

Resampling quality

Set the export resampling quality to the highest option for the final render. It takes longer to render, but the result is more accurate.

Common misconceptions

  • “A higher FLAC level means better sound.” Every FLAC level decodes to the same audio.
  • “Louder masters sound better on Spotify.” Streaming normalization turns down overly loud masters.
  • “Red mixer meters always mean distortion.” Inside FL Studio’s float mixer, they do not. The master and the export matter.
  • “Mastering fixes a bad mix.” Fix balance and EQ in the mix first.

If your master is clipping, see why audio clips in FL Studio. For a vocal chain, see FL Studio vocal effects.

The complete guide to fl studio

Best FL Studio Audio Settings, ASIO Driver and System Requirements
Read the guide

Keep exploring

Guides from other topics

All topics →