FL Studio

Why Is My FL Studio Recording Silent? Common Fixes

Why is my FL Studio recording silent? Work through the input, driver, track arm, record mode, interface gain and privacy settings in order to find the fault.

On this page
  1. Quick checklist
  2. 1. Choose an input on the mixer track
  3. 2. Check the driver in Audio Settings
  4. 3. Set the input in the FL Studio ASIO panel
  5. 4. Arm the track and choose audio recording
  6. 5. Check interface gain, phantom power and mute
  7. 6. Allow microphone access
  8. 7. Close apps holding the device
  9. Test the signal
  10. Common misconceptions
  11. Safety
  12. Related guides

A silent recording in FL Studio usually comes down to one of a few settings: no input chosen on the mixer track, the wrong audio device, a track that is not armed, or the operating system blocking the microphone. Work through the checklist below in order. Most problems are found in the first three steps.

Quick checklist

  1. The mixer track has an input selected.
  2. Audio Settings shows your interface’s driver.
  3. The FL Studio ASIO input is set, if you use it.
  4. The track is armed, and the record mode is audio.
  5. The interface gain is up, phantom power is on if needed, and nothing is muted.
  6. The operating system allows microphone access.
  7. No other app is holding the audio device.

1. Choose an input on the mixer track

Open the Mixer with F9. On the track you are recording into, open the input menu and choose your input, such as In 1. A track with no input records nothing, even if it is armed.

2. Check the driver in Audio Settings

Open Options > Audio Settings (F10). The device should be your interface’s ASIO driver on Windows, or its Core Audio device on macOS. An output-only device will not record your input. If your interface doesn’t appear at all, see audio interface not detected.

3. Set the input in the FL Studio ASIO panel

If you use FL Studio ASIO, the input device is chosen in its own panel, which you open with Show ASIO panel. It can default to nothing, or to the wrong device, so check it.

The Primary Sound Driver often does not expose inputs for recording. If you are using it, switch to an ASIO driver.

4. Arm the track and choose audio recording

Click the record button (the disk icon) on the mixer track so it is armed. Then check the record options. The take must be set to audio, recorded into the Playlist or into Edison. If it is set only to notes or automation, no audio is recorded. The how-to on recording audio shows the full set of steps.

5. Check interface gain, phantom power and mute

  • Interface gain at zero makes the input silent. Turn it up while you watch the meter.
  • Condenser microphones need +48 V phantom power from the interface. Turn it on only with the microphone connected and your monitors turned down.
  • Dynamic microphones need much more gain than condensers, so a quiet dynamic mic may need a lot of gain before it reaches a useful level.
  • Mute and fader: check that the mixer track is not muted and its fader is not down. Check the interface’s own software mixer too, if it has one.

6. Allow microphone access

  • Windows: go to Settings > Privacy & security > Microphone, and allow desktop apps to access the microphone.
  • macOS: go to System Settings > Privacy & Security > Microphone, and enable FL Studio.

7. Close apps holding the device

Another app can hold the audio device exclusively, including a browser, another DAW, or a call app. Many ASIO drivers are single-client, as explained in What Is ASIO?. Close them, then restart FL Studio. Restarting alone is often not enough, because you may also need to re-select the device in Audio Settings.

Test the signal

Watch the meter on the armed mixer track while you speak or play. If it moves, the signal is reaching FL Studio, and the take should record. If it does not move, go back to the input, the driver and the interface gain.

Common misconceptions

  • “Hearing myself means FL Studio is recording.” Direct monitoring sends the sound to your headphones without going through FL Studio.
  • “The microphone is broken.” Settings and routing cause most silent takes.
  • “The Fruity Edition records the same as the others.” Audio recording to the Playlist needs Producer Edition or higher.
  • “Restarting fixes the driver.” You often need to re-select the device in Audio Settings.

Safety

Turn your monitors down before you turn on phantom power or change the gain. A sudden loud signal can damage hearing and speakers.

For the full recording setup, see how to record audio in FL Studio. For driver and buffer choices, see the audio settings guide.

The complete guide to fl studio

Best FL Studio Audio Settings, ASIO Driver and System Requirements
Read the guide

Keep exploring

Guides from other topics

All topics →