Audio Quality Basics

What Is Dithering and When Should You Use It?

Dither is low-level noise added when you cut bit depth, such as exporting 24-bit to 16-bit. Learn when to use it, when to skip it and where it goes.

On this page
  1. Short answer
  2. What dither is
  3. What happens without dither
  4. When you need dither
  5. When you don’t need it
  6. TPDF vs noise-shaped dither
  7. Where dither goes in the chain
  8. Working with a mastering engineer
  9. Common misconceptions

Short answer

Dither is very low-level noise added just before you reduce bit depth, for example when exporting 24-bit audio to 16-bit. Its job is to replace harsh rounding distortion with steady, far less noticeable noise. Apply it once, at the final conversion to a lower bit depth. Skip it when you stay at 24-bit or higher, or when you export a lossy file.

What dither is

When you reduce bit depth, the extra precision is discarded. This is called truncation or quantization error. In loud, busy music the error is mostly hidden. In quiet passages, it becomes linked to the signal and can sound grainy or “steppy.”

Dither breaks up that link. It adds a small, random noise, so the error sounds like a steady, harmless hiss instead of distortion.

What happens without dither

The problems show up in quiet material: reverb tails, piano decays and fades to silence. Low-level detail can sound gritty or cut off abruptly. The effect is usually subtle at normal listening levels, but it can be audible on quiet fades.

When you need dither

  • Exporting a 24-bit or 32-bit float mix to 16-bit, such as a CD master or a 16-bit distribution file.
  • Any other reduction in fixed-point bit depth, such as converting a 24-bit file to 16-bit for a device that only accepts 16-bit.

When you don’t need it

  • Staying at 24-bit or higher. Dither noise at these depths sits far below audible and converter noise, so it adds nothing useful.
  • Exporting to 32-bit float. There’s no conversion to fixed point, so no dither is needed.
  • Changing sample rate alone. Bit-depth reduction calls for dither. A sample-rate change does not.
  • Encoding to MP3 or AAC. Encode from your 24-bit or float file. Dither is usually unnecessary here, though practice varies.

TPDF vs noise-shaped dither

There are two common types.

  • TPDF (triangular probability density function) is the standard, flat dither. It spreads a small, even amount of noise across the frequency range. Use it for general purposes and for intermediate files.
  • Noise-shaped dither moves the dither noise toward frequencies where hearing is less sensitive, usually the top of the audible range. Plugins such as POW-r and iZotope MBIT+ offer it. It can make a final 16-bit file sound cleaner, but avoid it if the file will be processed or dithered again later.

Where dither goes in the chain

Dither belongs at the very end of the chain, after the final limiter and any other processing. The home mastering guide shows where that sits in a full chain. Any processing after dither re-quantizes the signal and undoes the benefit. Apply it only once, because stacking dither adds noise and raises the noise floor.

Many DAW export dialogs (Pro Tools, Logic, Reaper and Ableton Live, among others) include a dither option. Mastering plugins such as iZotope Ozone and FabFilter Pro-L 2 also offer it. FL Studio has the option in its export dialog too; see mixing and mastering in FL Studio.

Working with a mastering engineer

If a mastering engineer is making your final master, let them handle dither when they make the 16-bit version. Send them your mix at 24-bit or 32-bit float, without dither.

For why 16-bit is a common target, see bit depth explained. For export formats, see best audio formats for quality.

Common misconceptions

  • “Dither is a mastering sweetener.” It’s a technical step for reducing bit depth.
  • “Dither everything to be safe.” Dithering at 24-bit or float adds nothing useful, and stacking dither adds noise.
  • “Dither fixes sample-rate changes.” It’s for bit depth.
  • “Dither noise is always audible.” At normal levels it’s generally inaudible. Its absence is what can show up on quiet fades.

The complete guide to audio quality basics

Sample Rate vs Bitrate: What Actually Affects Audio Quality
Read the guide

Keep exploring

Guides from other topics

All topics →