Short answer
For recording and mixing, use WAV or AIFF at 24-bit. For archiving, use FLAC, or ALAC on Apple devices. For sharing or streaming, use the format your platform asks for, often MP3 or AAC. WAV, AIFF, FLAC and ALAC all keep the full audio. They differ in file size and metadata support, not in sound.
Uncompressed: WAV and AIFF
WAV and AIFF store audio as uncompressed PCM. WAV is the common format on Windows and across most software. AIFF is the Apple-origin equivalent and sounds identical. At 24-bit, both keep the full detail of your recording.
Standard WAV files are limited to 4 GB. The RF64 variant handles larger files. BWF (Broadcast Wave) adds timestamp and metadata fields, and it is standard for field and post-production recording.
Lossless compressed: FLAC and ALAC
FLAC (open source) and ALAC (Apple) compress audio without discarding any data. When decoded, you get back the same audio bit for bit. FLAC files are typically 50 to 70% of the size of the equivalent WAV, depending on the content. The compression level changes file size and encode time, not quality.
FLAC isn’t lower quality than WAV. It’s the same audio, stored more compactly, in a way that can be fully reversed, much like a ZIP file.
Lossy: MP3, AAC, Ogg Vorbis and Opus
Lossy formats use psychoacoustic models to discard audio they judge hard to hear. That’s how they get small. AAC and Opus are more efficient than MP3 at the same bitrate. Ogg Vorbis is the format Spotify uses for its streams, and Opus is common for speech and real-time use.
Lossy formats suit delivery, not recording or archiving. Encode from your lossless master, and avoid re-encoding a lossy file. MP3 also adds encoder padding that can leave a gap when a loop repeats, as noted in how to import audio samples into FL Studio.
Can you hear lossless? What blind tests show
Most readers ask this first, and the evidence is mixed.
- In a 2007 paper in the Journal of the Audio Engineering Society, Meyer and Moran reported that listeners could not tell high-resolution playback from a 16-bit, 44.1 kHz loop across hundreds of trials.
- A 2016 meta-analysis by Reiss found a small but statistically significant ability to detect high-resolution audio, mostly among trained listeners. Its findings are still debated.
- In controlled ABX tests, most listeners cannot reliably tell 256 to 320 kbps lossy audio from lossless. Some trained listeners can identify specific difficult samples.
What this means: in everyday listening, most people can’t reliably hear the difference between lossless and a 256 to 320 kbps file. If you test it yourself, use blind comparisons with matched levels. Small level differences of 0.5 to 1 dB can bias listeners toward the louder version, so match levels carefully.
Hi-res labels and niche formats
“Hi-res” usually means a higher sample rate or bit depth than CD. The label doesn’t guarantee the source was recorded at that quality. Some releases are upsampled from lower-resolution masters.
DSD is a single-bit format used mainly for Super Audio CDs and some archival work. Support in home recording and playback chains is limited, so most home recordings don’t use it.
Choosing a format by job
| Job | Format | Why |
|---|---|---|
| Recording and mixing | WAV or AIFF, 24-bit (or 32-bit float) | Full quality, supported across DAWs |
| Archiving a music library | FLAC, or ALAC on Apple devices | Lossless, usually 50 to 70% of WAV size, with rich tagging |
| Mastering handoff or distribution | WAV at the bit depth your engineer or distributor asks for | Platform specs vary |
| Sharing or streaming | MP3 or AAC at a bitrate that suits the content | Smallest files |
Video platforms have their own preferences. YouTube’s audio requirements cover the format it recommends.
For bitrate targets, see what audio bitrate to use. For the recording bit depth, see bit depth explained. To prepare the master itself, see how to master audio tracks at home.
Bluetooth
Bluetooth codecs (SBC, AAC, aptX and LDAC) are lossy. Over most Bluetooth links, a lossless file still goes through a lossy codec, so the lossless benefit is lost in transit.
Common misconceptions
- “FLAC is lower quality than WAV.” It isn’t. Once decoded, the audio is identical.
- “A hi-res label guarantees hi-res sound.” Some releases are upsampled from lower-resolution sources.
- “Sighted comparisons prove a difference.” They don’t. Use level-matched blind tests.
- “Converting an MP3 to WAV or FLAC restores quality.” It doesn’t. The discarded data stays lost.