FL Studio

How can I reduce MIDI latency?

How can I reduce MIDI latency? Lower the audio buffer to 64 to 256 samples, use an ASIO driver, and connect your controller directly.

On this page
  1. Short answer
  2. Why the delay is usually the audio buffer
  3. Lower the buffer while you play
  4. Use the right driver
  5. Connect the controller properly
  6. Bypass heavy plugins while playing
  7. Check the synth patch’s attack
  8. What a good target looks like
  9. Related guides

Lower the audio buffer to 64 to 256 samples while you play, use your interface’s ASIO driver, and plug your MIDI controller directly into the computer. Most of the delay you feel comes from the audio buffer, not from the MIDI signal.

Short answer

Set a small buffer while you play, usually 64, 128 or 256 samples. Use your interface’s own ASIO driver, or FL Studio ASIO or ASIO4ALL if you have no interface. Connect the controller directly to the computer, and bypass heavy plugins on the track you are playing.

Why the delay is usually the audio buffer

A MIDI note reaches FL Studio quickly. The delay builds up after that, when the audio engine renders the sound and sends it to your speakers. The buffer decides how long each batch of audio takes.

You can estimate the time per buffer with this formula:

Delay per buffer (ms) = buffer size in samples ÷ sample rate × 1,000

At 48 kHz, a 64-sample buffer is about 1.3 ms, a 256-sample buffer is about 5.3 ms, and a 1024-sample buffer is about 21 ms. The round trip is roughly double, plus converter delay.

Lower the buffer while you play

Open Options > Audio Settings (F10) and set the buffer length to 64, 128 or 256 samples. Play a short phrase to test it. If you hear crackles or dropouts, raise the buffer one step. The underrun counter in the same panel shows when the CPU cannot keep up.

When you switch back to mixing, raise the buffer again, to 512 samples or more, so the CPU has time for the plugins.

Use the right driver

On Windows, use your audio interface’s own ASIO driver. Without an interface, FL Studio ASIO or ASIO4ALL are the usual options. On macOS, FL Studio uses Core Audio. The driver often has a bigger effect than the controller itself. The audio settings guide explains the driver options in more detail.

Connect the controller properly

  • USB controllers should be plugged straight into the computer, not into an unpowered hub. USB MIDI adds very little delay, usually about 1 ms or less.
  • Bluetooth MIDI is slower and less consistent. It often adds around 10 to 20 ms or more, depending on the device.
  • 5-pin DIN MIDI cables send data at a fixed speed. A note-on takes about 1 ms to send.

Make sure the controller is enabled in Options > MIDI Settings. If the keyboard sends notes but FL Studio does not respond, check that the controller is selected there. For connecting specific controllers, such as an Akai MPK Mini, see MIDI controller setup.

Bypass heavy plugins while playing

Limiters, linear-phase EQs and mastering plugins can add processing delay and use a lot of CPU. Bypass them on the track you are playing. For large patterns, you can also freeze or bounce the part to audio. Close CPU-heavy background apps too.

Check the synth patch’s attack

Some synth patches have slow attack times, so the sound fades in and feels late, even when the system delay is small. If a patch feels sluggish, check its attack setting before you blame the computer.

What a good target looks like

A round trip of about 10 ms or less usually feels immediate to most players, although people differ. The buffer, driver and plugins together decide how close you get to that target.

For delay when recording or playing audio, see how to fix audio and MIDI latency in FL Studio. To play notes in the Piano Roll, see how to use the piano roll in FL Studio.

The complete guide to fl studio

Best FL Studio Audio Settings, ASIO Driver and System Requirements
Read the guide

Keep exploring

Guides from other topics

All topics →