In most cases, the delay you feel in FL Studio comes from the audio buffer, not from the MIDI signal. This guide helps you work out which kind of delay you have, then fixes them in order, starting with the buffer.
Find the kind of delay you have
- A virtual instrument feels late when you play it. This is usually the buffer, plus delay from plugins in the chain. Start with the buffer and the driver.
- You hear your voice or instrument late while recording. Monitoring through FL Studio adds the buffer’s delay. Use direct monitoring from your interface, as described below.
- A recording lands late on the timeline. This comes from the recording path and the latency your device reports. Check the device’s latency and any offset setting in the mixer track properties. Exact options vary by version.
- A MIDI keyboard feels late. Check the connection and the buffer. The MIDI latency guide covers this in more detail.
Step 1: Lower the buffer length
Open Options > Audio Settings (F10) and lower the Buffer length to 128 or 256 samples. Then play or record a short test. If you hear crackles, raise the buffer one step. Keep an eye on the underrun counter in the same panel, which should stay low.
For a sense of scale, at 48 kHz a 256-sample buffer adds about 5.3 ms per buffer. The round trip, from playing to hearing the sound, is roughly double that, plus converter delay. The audio settings guide has a full table.
Step 2: Use your interface’s ASIO driver
If you have an external audio interface, select its ASIO driver in the same panel. FL Studio ASIO and ASIO4ALL are fallbacks for built-in sound. These driver choices apply to Windows. On macOS, FL Studio uses Core Audio.
Step 3: Bypass lookahead and linear-phase plugins while tracking
Limiters, linear-phase EQs and some mastering plugins add processing delay. FL Studio’s plugin delay compensation keeps tracks aligned during playback. It does not remove the delay you hear while you play or record live. Bypass these plugins on the master and on any track you are recording into.
Step 4: Turn off Triple buffer and check Windows power settings
Triple buffer can stop glitches, but it adds latency. Turn it off while you record. On Windows, the High Performance power plan and turning off USB selective suspend can help with dropouts. LatencyMon can show driver spikes (DPC latency) that may be causing them.
Hearing yourself while recording: use direct monitoring
If you use an external interface, turn on its direct or zero-latency monitoring, so you hear the input without waiting for the computer. Check that the armed mixer track is not also sending the input through FL Studio, which would make you hear the signal twice.
Monitoring through earbuds with Bluetooth audio adds a long delay, often 100 to 300 ms. Avoid monitoring through Bluetooth while you record.
MIDI keyboard delay
Enable your controller in Options > MIDI Settings. Plug USB controllers straight into the computer rather than an unpowered hub. USB MIDI adds very little delay, usually about 1 ms or less. Wireless MIDI adds much more, often 10 to 30 ms, depending on the device. For a full walkthrough, read how to reduce MIDI latency.
Common misconceptions
- “Latency is a MIDI problem.” Nearly all the delay you feel comes from the audio buffer.
- “Plugin delay compensation fixes monitoring delay.” It only aligns tracks that have already been recorded.
- “A higher sample rate is the best fix.” It helps a little, but it costs CPU. The buffer and driver matter more.
- “A fast CPU means no latency.” The driver and buffer settings matter more than raw processing power.
Related guides
Once the buffer is sorted, check the audio settings guide for driver and sample rate choices. If the problem is a silent take rather than a late one, see why an FL Studio recording is silent.