Audio Interfaces

Audio-Technica AT2020 USB Setup, Software and EQ

Set up an Audio-Technica AT2020 USB mic on Windows or macOS, check whether it needs software, and choose free or paid EQ that suits your use.

On this page
  1. Plug in and go
  2. Which AT2020 you have
  3. Set it up on Windows
  4. Set it up on macOS
  5. Placement and gain
  6. Software and firmware
  7. EQ: free and paid options
  8. Starting EQ settings
  9. Common mistakes
  10. FAQ

Plug in and go

The AT2020 USB is a class-compliant USB microphone. It needs no driver on Windows or macOS. Plug it in, select it as your input, and set the level. Any EQ happens in your recording app or a free tool.

Which AT2020 you have

Audio-Technica sells several USB versions. Check the label on yours, because the specifications differ:

  • AT2020USB: the original. It has no headphone jack.
  • AT2020USB+: adds a headphone jack and a mix dial, which blends the mic with computer playback. It records at 16-bit/48 kHz.
  • AT2020USB-X: uses USB-C, supports up to 24-bit/96 kHz, and has a touch mute.
  • AT2020USB-XP: a later model. Check its specification sheet for its feature set.

The XLR AT2020 is a separate microphone. It needs an interface or mixer with phantom power, so it can’t plug into the USB port.

Set it up on Windows

  • Open Settings > Sound > Input and select the AT2020 as your input device.
  • For gain and format, open the Sound Control Panel, go to Recording, select the mic, and open Properties. The Levels tab sets the gain, and the Advanced tab sets the format.
  • If your DAW doesn’t list a native ASIO driver for the mic, WASAPI is one option. ASIO4ALL is a generic driver that some users fall back on.

Set it up on macOS

  • Open System Settings > Sound > Input and select the AT2020.
  • To set the sample format, such as 48,000 Hz, open Applications > Utilities > Audio MIDI Setup and select the mic.

Placement and gain

  • Speak into the front of the mic, on the logo side. It’s side-address, so speaking into the top gives a poor sound.
  • Keep about 6 to 12 inches (15 to 30 cm) away, and use a pop filter. Standing closer adds bass from the proximity effect.
  • Set the input level so peaks sit around -12 to -6 dBFS.

If the sound is quiet, raise the input level before you add any EQ. Turning up gain too far can bring up background noise.

Software and firmware

The classic AT2020 USB models don’t need any software to record. Audio-Technica publishes firmware updates on its software and firmware page for some models. The company also offers a 20 Series Control Application for compatible newer 20 Series USB microphones. Check your model’s page to see what’s available.

EQ: free and paid options

Free options

  • Windows: Equalizer APO is a free, system-wide equalizer that runs in the background. It’s often used with the Peace graphical interface.
  • Mixers: Voicemeeter (Windows) can route the mic through an EQ and effects before it reaches apps such as Discord, Zoom or OBS. Elgato Wave Link works on Windows and macOS.
  • Recording apps: your DAW’s built-in EQ and Audacity both work. OBS has filters for streaming.

Paid options

Plugins such as FabFilter Pro-Q 4, SSL X-EQ 2 and Waves GEQ give finer control inside a DAW.

Windows has basic audio enhancement settings, but what’s available depends on your driver. For a full microphone EQ, use one of the free tools above.

Starting EQ settings

These are starting points, not rules:

  • A high-pass filter at 80–100 Hz removes low rumble.
  • A cut at 200–400 Hz can reduce muddiness.
  • A gentle boost around 3–5 kHz adds presence.
  • A de-esser, or a narrow cut around 5–8 kHz, helps if sibilance sounds harsh.

EQ won’t fix an echoey or noisy room. Treatment and placement matter more. For noise problems, see how to fix static, buzz and digital noise.

Common mistakes

  • Speaking into the top of the mic.
  • Expecting the USB model to need phantom power or an interface. It doesn’t.
  • Plugging the USB model into an XLR interface. It won’t connect. The XLR AT2020 is a separate model.

FAQ

Does an AT2020 need phantom power?

The USB model doesn’t. It runs on power from the USB connection. The XLR AT2020 does need 48 V phantom power from an interface or mixer.

Is the AT2020 better than a Blue Yeti?

They suit different needs. The AT2020 is a cardioid mic with a single pattern. The Yeti is a USB mic with several pickup patterns. Compare the pattern, the placement and your room before you choose.

How do I make the AT2020 sound better?

Start with placement: speak into the front, keep the mic 6 to 12 inches away, and use a pop filter. Then set the gain, treat the room if you can, and try a high-pass filter with gentle EQ.

What is the best free equalizer?

On Windows, Equalizer APO with the Peace interface is a common free choice. In a DAW or on macOS, the built-in EQ is usually enough to start with.

How can I fix low volume in my microphone?

Raise the input level in your sound settings or your recording app. Check the placement too, and keep the mic within the 6 to 12 inch range.

The complete guide to audio interfaces

How to Set Up an Audio Interface for Home Recording
Read the guide

Keep exploring

Guides from other topics

All topics →