Recording on a Computer

How to record internal audio on Mac?

Record internal audio on a Mac using a built-in option, OBS, or the free BlackHole driver with a Multi-Output Device. Setup steps and troubleshooting.

On this page
  1. Quick answer
  2. Why QuickTime doesn’t capture internal audio
  3. Option 1: a built-in system audio option
  4. Option 2: OBS on macOS 13 or later
  5. Option 3: BlackHole with a Multi-Output Device
  6. Record your mic and system audio together
  7. Sample rates and drift
  8. Permissions
  9. Paid options
  10. Troubleshooting
  11. Recording permission and consent

Quick answer

QuickTime’s audio recording and the Screenshot toolbar’s recording mode generally capture your microphone, not the sound your Mac is playing. To record internal audio, you can use a system audio option if your macOS version has one, use OBS on macOS 13 or later, or install BlackHole (a free virtual audio driver) and route your output through a Multi-Output Device. Paid apps such as Audio Hijack and Loopback do the same job with less setup.

Why QuickTime doesn’t capture internal audio

QuickTime Player’s audio recording reads from an input device, usually your microphone. Your Mac doesn’t offer system playback as an input by default, so there’s nothing to select. A virtual driver creates that input.

Option 1: a built-in system audio option

Some newer macOS versions may offer a system audio option for screen recording. To check, press Shift-Command-5, click Options, and look for something like Include System Audio under Capture. If your version doesn’t show it, use one of the options below.

Option 2: OBS on macOS 13 or later

OBS can capture app and desktop audio on macOS 13 (Ventura) or later, through its macOS audio capture source. Add that source in OBS, check that the Audio Mixer shows levels, and start recording. OBS saves video by default, so if you only need the audio, extract the track in an editor afterward.

Option 3: BlackHole with a Multi-Output Device

BlackHole is free and open source. For stereo, use the 2-channel version, BlackHole 2ch.

  1. Install BlackHole, either from its installer or with Homebrew: brew install blackhole-2ch.
  2. Open Audio MIDI Setup (search for it in Spotlight).
  3. Click + and choose Create Multi-Output Device. Tick your speakers or headphones and BlackHole. Make your speakers the primary device, and turn on Drift Correction for BlackHole.
  4. In System Settings > Sound, set the output to the Multi-Output Device. Keyboard volume keys don’t work with a Multi-Output Device, so adjust volume in the app or on the device.
  5. In your recording app (QuickTime, Audacity, GarageBand or OBS), choose BlackHole as the input.
  6. Record, then switch the output back to your normal speakers.

For Audacity-specific steps, see how to record desktop audio in Audacity.

Record your mic and system audio together

Create an Aggregate Device that combines your microphone and BlackHole. In Audio MIDI Setup, click +, choose Create Aggregate Device, and tick BlackHole and your microphone. Then select the Aggregate Device as the input in your recording app.

If your microphone and BlackHole run at different sample rates, you can get drift or pitch problems. Match them, for example at 48 kHz, in Audio MIDI Setup.

Sample rates and drift

Keep sample rates matched across your devices. 48 kHz is a common choice. Turn on drift correction for BlackHole in the Multi-Output Device. These two settings prevent slow timing drift and pitch changes over a long recording.

Permissions

Recording apps need permission in System Settings > Privacy & Security. Grant Microphone access for microphone recording, and Screen Recording access if the app asks for it.

Audio Hijack and Loopback (from Rogue Amoeba) route and record app audio through a graphical interface. Prices vary; at the time of writing they’re roughly $60 to $110, so check current pricing before you buy.

Troubleshooting

  • The recording is silent. Check that the recording app’s input is BlackHole or your Aggregate Device, and that the Multi-Output Device is the system output. Some streaming apps protect their audio and output silence when it’s captured.
  • You can’t hear anything while recording. Confirm that your speakers or headphones are ticked in the Multi-Output Device and set as primary.
  • Pitch or speed is off. Your sample rates don’t match. Set them to the same value, such as 48 kHz.
  • An older tutorial recommends Soundflower. Soundflower is outdated and doesn’t support Apple Silicon. Use BlackHole.
  • You hold a microphone near the speakers. That records room sound, not internal audio, and the quality is poor.

Recording copyrighted audio or video may breach a service’s terms or copyright law. Recording a call may require everyone’s consent in some places. Get permission before you record.

The complete guide to recording on a computer

How to Record High-Quality Audio on Your Computer
Read the guide

Keep exploring

Guides from other topics

All topics →