Quick answer
On Windows, set Audacity’s audio host to Windows WASAPI and choose your speakers or headphones marked (loopback) as the recording device. On a Mac, Audacity can’t capture computer sound by itself. Install a free virtual driver such as BlackHole and route your output through it.
Before you start
- Check your version. Menu names and device settings differ between versions. In Audacity 3.x, devices are under the Audio Setup toolbar button. Older versions use the Device Toolbar dropdowns.
- Match the sample rate. Set the project rate to match your output device, such as 48000 Hz. A mismatch can cause errors or wrong pitch.
- Turn off Software Playthrough. You’ll find it under Transport > Transport Options. It can cause echo or feedback loops.
- Silence notifications. Pings and alerts end up in the recording.
Windows: record with WASAPI loopback
- Open Audacity and click the Audio Setup button.
- Set Host to Windows WASAPI.
- Set Recording Device to your speakers or headphones marked (loopback).
- Start playing the audio you want to capture, then click the red Record button (or press R).
- Click Stop (or press Space) when you’re finished.
- Use the File menu’s export command to save a WAV or MP3. In recent versions it’s File > Export Audio.
WASAPI loopback records the digital signal your computer sends to the output device. You don’t need extra drivers or a microphone.
Windows: Stereo Mix as a fallback
Some drivers, often Realtek, include a Stereo Mix recording device that carries the playback signal.
- Right-click the speaker icon and open Sound settings or the Sound Control Panel.
- On the Recording tab, right-click an empty area and tick Show Disabled Devices.
- Right-click Stereo Mix and choose Enable.
- In Audacity, select Stereo Mix as the recording device.
If Stereo Mix doesn’t appear, your driver doesn’t provide it. Use WASAPI loopback instead.
macOS: BlackHole and a Multi-Output Device
Audacity needs a virtual driver to record system audio on a Mac.
- Install BlackHole. You can use its installer, or run
brew install blackhole-2chwith Homebrew. - Open Audio MIDI Setup, click +, and choose Create Multi-Output Device.
- Tick your speakers or headphones and BlackHole. Make your speakers the primary device, and turn on Drift Correction for BlackHole.
- In System Settings > Sound, set the output to the Multi-Output Device. Volume keys don’t work with a Multi-Output Device, so adjust volume in the app or on the device.
- In Audacity, set Recording Device to BlackHole.
Keep the sample rates matched in Audio MIDI Setup (48 kHz is common). After recording, switch your output back to your normal speakers.
To record your microphone and computer audio together, you need an Aggregate Device. See how to record internal audio on a Mac and the overview of computer audio recording.
Linux: monitor source
On Linux with PulseAudio or PipeWire, start a recording in Audacity. Then open pavucontrol, go to the Recording tab, and set Audacity’s input to Monitor of your output device.
Record, check levels and export
Watch the recording meter. Peaks should stay below 0 dB. If the meter clips, lower the volume of the app or system that’s playing. Clipping can’t be undone, so a quieter clean take is better than a loud distorted one.
Record a short test first, play it back, and check that you hear the right sound before you start the real take.
Troubleshooting
The take is silent. Confirm that the host and recording device are correct and that something is actually playing through that output.
The recording has echo or feedback. Turn off Software Playthrough. If you’re monitoring a microphone, use headphones.
Your microphone and desktop sound won’t record together. Audacity can’t capture two input devices at once on its own. Use a routing tool, as explained in the computer audio recording guide.
The pitch or speed is wrong. The project rate doesn’t match the device rate. Set both to the same value, such as 48000 Hz.
Is Audacity good for audio recording?
For most voice and desktop capture, yes. It’s free, runs on Windows, macOS and Linux, and handles the recording chain well. Its limits are real, though. Many edits are destructive, and the interface is dated. Newer versions added real-time effects, but many changes still can’t be undone later. If you need a different workflow, see alternatives to Audacity.
What has happened to Audacity?
Muse Group acquired Audacity in 2021. The change led some users to look at other options, and it’s one reason a community fork called Tenacity appeared in the same year. Audacity remains free and open source under the GPL.
Recording permission
Recording copyrighted streams or videos may breach a service’s terms or copyright law. Get permission before you reuse someone else’s audio.