Short answer
For recording, you don’t pick a kbps value. Record uncompressed WAV or AIFF at your chosen sample rate and bit depth, and the bitrate follows from those settings. Bitrate becomes a real choice when you export a file to share or stream, usually as MP3 or AAC.
Recording: bitrate comes from the settings
Uncompressed bitrate is sample rate × bit depth × channels. These are common recording settings:
| Recording setting | Bitrate | Approximate size per minute |
|---|---|---|
| 44.1 kHz, 16-bit, stereo (CD) | 1,411 kbps | 10.6 MB |
| 48 kHz, 24-bit, stereo | 2,304 kbps | 17.3 MB |
| 48 kHz, 24-bit, mono | 1,152 kbps | 8.6 MB |
For the reasoning behind these settings, see sample rate vs bitrate.
Lossy exports: pick a bitrate for the job
These are common starting points, not rules. Check your platform’s current upload or streaming specs, since they change. For video, see YouTube audio requirements.
- Spoken word and podcasts: 64 to 96 kbps mono works for basic speech. 128 kbps stereo MP3 is a common podcast setting. Audiobook platforms set their own specs, such as the ACX checklist in best audio recording software for audiobooks.
- Voice memos and dialogue: 64 kbps mono AAC is usually adequate.
- Music for listening: 192 to 256 kbps sounds clean to most listeners. 128 kbps is acceptable for casual listening, but it can sound smeared on cymbals and other high-frequency detail.
- Maximum for MP3: 320 kbps. Apple Music’s AAC standard is 256 kbps.
“Transparent” means a listener can’t reliably tell the encoded file from the original in blind tests.
CBR vs VBR
Constant bitrate (CBR) holds the same bitrate for the whole file. That keeps the size predictable, and it’s why CBR is often used for live streaming, where the connection needs a steady rate.
Variable bitrate (VBR) changes the bitrate with the complexity of the audio. Dense passages get more data and quiet ones get less, so VBR files are often smaller at similar quality. For MP3, LAME’s VBR setting V0 averages roughly 220 to 260 kbps and is widely considered transparent.
Some guides prefer CBR for quality. In practice, a good VBR setting is widely used for file exports, so choose based on your delivery target.
Lossless bitrates
FLAC and ALAC are lossless. The decoded audio matches the original exactly. CD-quality lossless typically runs about 700 to 1,100 kbps, depending on the music. These files are larger than MP3 or AAC, but they’re the right choice for archives and masters. A FLAC encoder’s compression level changes only the file size, as the FL Studio export settings show.
Streaming services set their own tiers. Spotify’s top lossy tier is about 320 kbps. Spotify added a lossless tier for Premium in 2025, and availability varies by region.
Don’t re-encode lossy files
Encode from the lossless master, not from another lossy file. Re-encoding a 128 kbps file at 320 kbps doesn’t add detail, because the loss already happened. Bitrates also don’t compare directly across codecs: 128 kbps AAC or Opus generally beats 128 kbps MP3.
kbps vs KB/s
kbps means kilobits per second. Divide by 8 to get kilobytes per second. A 320 kbps file uses about 40 KB every second, or about 2.4 MB per minute.
Common misconceptions
- “320 kbps is lossless.” It’s lossy, but in controlled blind tests most listeners can’t reliably tell it from lossless.
- “Higher bitrate always sounds better.” Above transparent levels, more bitrate adds little, and it can’t fix a poor source.
- “Bitrate numbers compare across codecs.” They don’t.
- “A high bitrate makes loud listening safer.” It doesn’t. Prolonged listening above about 85 dB SPL can damage hearing, whatever the file’s bitrate.